Wikipedia Description
https://en.wikipedia.org/wiki/OpenFlow
OpenFlow enables network controllers to determine the path of network packets across a network of switches. The controllers are distinct from the switches. This separation of the control from the forwarding allows for more sophisticated traffic management than is feasible using access control lists (ACLs) and routing protocols. Also, OpenFlow allows switches from different vendors — often each with their own proprietary interfaces and scripting languages — to be managed remotely using a single, open protocol. The protocol’s inventors consider OpenFlow an enabler of software-defined networking (SDN).
OpenFlow allows remote administration of a layer 3 switch’s packet forwarding tables, by adding, modifying and removing packet matching rules and actions. This way, routing decisions can be made periodically or ad hoc by the controller and translated into rules and actions with a configurable lifespan, which are then deployed to a switch’s flow table, leaving the actual forwarding of matched packets to the switch at wire speed for the duration of those rules. Packets which are unmatched by the switch can be forwarded to the controller. The controller can then decide to modify existing flow table rules on one or more switches or to deploy new rules, to prevent a structural flow of traffic between switch and controller. It could even decide to forward the traffic itself, provided that it has told the switch to forward entire packets instead of just their header.
The OpenFlow protocol is layered on top of the Transmission Control Protocol (TCP) and prescribes the use of Transport Layer Security (TLS). Controllers should listen on TCP port 6653 for switches that want to set up a connection. Earlier versions of the OpenFlow protocol unofficially used port 6633.[2][3] Some network control plane implementations use the protocol to manage the network forwarding elements.[4] OpenFlow is mainly used between the switch and controller on a secure channel.[citation needed]
David Bombal Explains what open flow based switchs and controller are.